Little Samson Models

6" Scale iron castings

More castings : Click here for laser cutting, non ferrous sand and lost wax castings, malleable iron, and spun chimney cap

Click here for 6 " scale specimen order (built up wheels)

Click here for 6 " scale specimen order (cast wheels)

 

The boiler is available complete from AJB Engineering (Tony Baldwin).

Most castings will be held in stock for immediate collection or despatch.

Sorry, no machining services. Gear cutting available, click gear cutting link on home page for prices.


Cast iron

    01: Flywheel 196
    02: Back hub centres, price for two. 94
    03: Back hub cover plates, 4 castings. 79
    04: Differential Centre 243
    05: Final Drive Gear Ring 138
    06: Differential bevels & pinions, set of four castings 197
    07: Second Motion Centre 94
    08: Second Motion Gear ring 108
    09: Back Axle Tube 96
    10: Crankshaft bearing bracket, price for two 68
    11: Second shaft bearing brk, price for two 70
    12: Steering wheel 27
    13: Cylinder 289
    14: Cylinder liner 43
    15: Cylinder covers, one of each 49
    16: Trunk guide 97
    17: Back axle driving boss 74
    18: Brake drum 81


    19: Brake handwheel 18
    20: Brake bracket (two castings) 46
    21: Crankshaft gear blank, low gear 40
    22: Crankshaft gear blank, high gear 51
    23: Final drive pinion 49
    24: Chimney base 75
    25: Front fork 79
    26: Front fork top bracket 41
    27: Cylinder head standard 36
    28: Cylinder head for use with governor
    29: Valve chest cover 32
    30: Smokebox door 66
    31: Back wheel, each 325
    32: Front wheel, each 215
    33: Eccentric straps, set of three 72
    34: Piston blank 16
    35: Water pocket & lid £44

    36: Back wheel bearings, pair 33

 

NOTE: The flywheel, back wheels and front wheels weigh 27kg, 62kg, and 25 kg each respectively. When cast the back wheels are 29.5" in diameter and the front wheels 20.5" in diameter.

The wheels are also available in high tensile aluminium, the weights being 26 kg and 9.5 g each. It is anticipated that all the 6" scale wheel castings will be collection only.

The diffential bevel set is cast from machine cut aluminium patterns for maximum accuracy.

Little Samson Models keeps 6" castings in Stock for your inspection, or immediate collection. No need to wait.