Little Samson Models

Specimen order for 6 ” GMT

Below includes all the extras, such as rear springs, water cut expansion links, transfers, flanged tender and front tank plates, and many other parts that some builders choose to make themselves rather than purchase.

Cast Iron
01 Flywheel  £ 188
02 Left hand oval back hub (oval)  £ 64
03 Right hand back hub (round)  £ 61
04 Left hand oval back hub cover plate (oval)  £ 38
05 Right hand round back hub cover plate (round)  £ 36
06 Left hand inner oval cover plate (oval)  £ 44
07 Right hand inner cover plate/bush combined  £ 71
08 Left hand oval hub bush  £ 27
09 Back hub caps (pair)  £ 52
10 Front hubs, pair  £ 66
11 Front hub inner cover plates  £ 38
12 Front hub outer cover plates  £ 38
13 Front hub caps (pair)  £ 28
14 Right hand final drive gear ring  £ 119
15 Left hand final drive gear ring  £ 111
16 Left hand gear centre & winding drum  £ 132
17 Slow speed gear ring  £ 72
18 Intermediate speed gear ring  £ 57
19 Fast speed gear ring  £ 47
20 Differential centre  £ 67
21 Back axle bearing brackets (pair)  £ 99
22 Back axle tube  £66
23 Left hand crankshaft bearing housing  £ 34
24 Left hand crankshaft bearing housing cap  £ 17
25 Right hand crankshaft bearing housing  £ 68
26 Right hand crankshaft bearing housing cap  £ 14
27 Second shaft axle tube  £ 62
28 Cylinder  £ 895
29 HP & LP piston  £ 31
30 Cylinder back cover  £40
31 HP & LP valve chest cover  £ 59
32 Safety valve chimneys  £ 35
33 Motion bracket  £ 68
34 Guide bars (set of four)  £ 72
35 Crossheads (pair)  £ 64
36 Eccentric straps (set of four)  £ 65
37 Feed pump eccentric strap  £ 18
38 Balance weights for crankshaft (set of four)  £ 39
39 Chimney base  £28
40 Chimney saddle  £ 64
41 Smoke box door  £ 58
42 Smoke box door reducing ring  £ 64 
43 Steering rod bracket  £ 16
44 Steering brackets (pair)  £ 45
45 Brake rod bracket  £ 15
46 Brake bearing housings (pair)  £ 64
47 Steering wheel  £ 36 
48 Brake hand wheel  £ 30
49Flywheel brake hand wheel  £ 27
50 Flywheel brake shoe  £ 31
51 Gear selector bracket  £ 62
52 Gear selector forks (pair)  £ 64
53 Regulator bracket (lost wax steel)  £ 37
54 Governor  £38
55 Differential locking bracket  £ 19
56 Grate  £ 53
 £3,853.00
Speroidal Graphite
1 Crankshaft  £ 194.00
2 Front axle    £ 104.00
3 Front Fork  £ 88.00
4 Perch bracket  £ 95.00
5 Crankshaft slow speed pinion  £ 38.00
6 Crankshaft intermediate speed pinion  £ 47.00
7 Crankshaft fast speed gear ring  £ 49.00
8 Fast speed gear ring centre  £ 54.00
9 Right hand bevel wheel centre  £ 36.00
10 Left hand final drive pinion  £ 48.00
11 Right hand final drive pinion  £ 41.00
12 Back spring housings (pair)  £139.00
13 Back spring tee pieces  £ 32.00
14 Brake lever  £ 42.00
 £ 965.00
Sand Cast Gunmetal 
1 Smoke box name ring –large   £ 62.00
2 Big end bearings, 4 castings,   £ 69.00
3 Crankshaft main bearings, left & right, 4 castings,   £ 89.00
4 Second shaft bearings, pair   £ 5.00
5 Back axle bearings, pair   £ 54.00
6 Front wheel bearings   £ 47.00
7 HP & LP valve chest name plates    £ 48.00
8 Manifold   £ 24.00
9 HP & LP slide valves (pair)   £ 48.00
10 Globe valve bodies (makes two)   £ 26.00
11 Whistle mounting bracket & valve   £ 29.00
12 Boiler Feed pump body   £113.00
13 Feed pump covers, set of three,   £ 58.00
14 Feed pump gland, internal sleave & clacks   £ 39.00
15 Clean out boiler plate (lost wax)  £ 18.00
16 Injector boiler clacks, pair,    £ 72.00
17 Blow down (two castings)   £ 34.00
18 Set of 6 glands for piston, valve, and regulator rods   £ 62.00
 £ 897.00
Fabrications, rollings, pressings and laser cutting
1 Pair horn plates LH pressed before laser cut.   £ 182.00
2 Set of front wheel spokes  £ 56.00
3 Set of back wheel spokes   £ 128.00
4 Pair of box brackets   £ 38.00
5 Pair tender draw straps   £ 48.00
6 Rolled steel smoke box   £ 63.00
7 Rolled steel smoke box to boiler reducing ring   £ 33.00
8 Rolled chimney.   £ 90.00
9 Front wheel rims (pair)   £ 83.00
10 Back wheel rims (pair)   £ 264.00
11 Pair of brake rings   £ 32.00
12 Flanged LH & RH back tank sides (pair)   £ 120.00
13 Flanged front tank ends (pair)   £ 90.00
 £ 1,227.00
Spinnings, Springs, Water Cutting, transfers
1 Spun chimney cap   £ 128.00
2 Set of three leaf springs, one front two back. (POA)  £ 532.00
3 Safety valve spring.    £ 24.00
4 Pair of expansion links.   £ 226.00
5 Gold Medal RAC Transfer   £ 30.00
6 Weights transfer (cream letters)   £ 5.00
7 Speed 5 mph transfer (cream letters)   £ 3.00
 £ 948.00
Machine Cut Gears
1 Lost wax cast steel differential bevels and pinions   £ 325.00
2 Machine cut steering worm and worm wheel   £ 86.00
3 Machine cut feed pump gears (SG pinion & CI gear) (pair)   £ 72.00
 £ 483.00
OVERALL TOTAL  £ 8,373.00