Little Samson Models

3" scale Iron Castings and Chassis Materials for Universal Carrier

 

    Iron Castings
    01: Front wheel 44 each
    02: Back wheel 51 each
    03: Chain drive connector 56 pair (for cast wheel)
    04: Chain drive connector 61 pair (for wooden wheel)
    05: Cylinder 62
    06: Cylinder cover, front 11
    07: Cylinder cover, back 17
    08: Valve chest cover 7
    09: HP & LP pistons 7
    10: Piston valve & liner 8
    11: Steering wheel 10
    12: Brake hanger (front) 17 pair
    13: Brake hanger (back) 15 pair
    14: Rear brake levers 20 pair
    15: Rear brake shoes 30 (four castings)
    16: Brake bevel housing 23
    17: Rear axle spring pad & clamp 25 (four castings)
    18: Vertical boiler chimney base 44
    19: Loco boiler chimney base 16
    20: Loco boiler Smoke box door 20

    Chassis & Materials
    Folded channel 54 (Full set)
    Front axle 14 (two channels to join together)

    Material for front springs: 6 two foot lengths 36 (6 per 2 foot length)

    Material for back springs: 8 two foot lengths 80 (10 per 2 foot) Set for front and back: 110. Spring material specification: BS1449CS70 conforms to C67S 10132-4 *supplied annealed*

    Speroidal graphite
    RH front stub axle 20
    LH front stub axle 20

    Laser cutting
    Rear Engine support 14 pair
    Brake support 18 pair
    Rear gusset plate 11.50 pair
    Centre gusset plate 16 pair
    Engine front support 10.50 (laser cut from 8mm plate)

 

Note: Road wheels also available in aluminium

Back to home page